Recommended Order for HGiG, Console HDR, and GTA VI Settings

VGC's Dave Aubrey recommends an image-quality sequence for GTA VI on supported HDR TVs. First, turn on Game Mode and HGiG on your TV.

Second, adjust your console's settings. Last, adjust the game's settings.

The TV menu, your console's system settings, and GTA VI's in-game settings are separate, so keep them distinct as you follow this order.

  1. Enable Game Mode on your supported HDR TV and select HGiG.
  2. Adjust HDR in your console's system settings menu.
  3. Finally, check the picture adjustment options available in GTA VI's in-game settings menu.
Recommendation sourceVGC (Dave Aubrey, GTA VI launch-time article)
Scope and caveatImage-quality recommendation for supported HDR TVs and GTA VI; menu names depend on your TV
LG example in VGCHDR Tone Mapping is located under Brightness while in Game Mode

How to Enable HGiG on an LG HDR TV

On supported LG TVs, HGiG is enabled only when two conditions are met: an HDMI cable is connected, and the screen mode is set to Game Optimizer.

The menu path under All Settings differs between 2021 and later models (webOS 6.0 or later) and 2020 and earlier models (webOS 5.0 or earlier). Follow the path for your TV's version.

See the LG G6 OLED’s Game and HDR picture options in Immersive Gaming’s demonstration
  1. Connect your supported console to the LG TV using an HDMI cable.
  2. Set the TV's screen mode to Game Optimizer.
  3. Open Settings on your TV remote and select All Settings.
  4. On 2021 and later models (webOS 6.0 or later), go to General, then Game Optimizer, then Screen. On 2020 and earlier models (webOS 5.0 or earlier), go to Video, then Video Mode Settings, then Advanced Settings.
  5. Open Tone Mapping Compensation and select HGIG.
Source and regionLG US support (supported LG TVs)
Compatibility noteSupport and menus vary by TV model, connected device, and game
Brightness noteImage may appear darker than with standard Tone Mapping set to On

How to Adjust HDR on PS5

After enabling HGiG on your TV, adjust HDR in your PS5 system settings. Do this before changing GTA VI's in-game settings.

See the PS5 Adjust HDR screen in Immersive Gaming’s demonstration
  1. Open Settings in the PS5 system menu and go to Screen and Video.
  2. Select Video Output, then choose Adjust HDR.
  3. Follow the on-screen instructions to adjust HDR.
Source and regionPlayStation US support (English UI)
Confirmed scopeVerifies the menu path to the PS5's built-in HDR adjustment feature only

How to Adjust HDR on Xbox Series X|S

After enabling HGiG on your TV, open the Xbox Series X|S HDR calibration tool for games. Do this before tuning GTA VI's in-game settings.

The path below is the one given by Xbox Wire in 2020, and the current console UI may differ.

  1. Following the 2020 Xbox Wire guide, follow the path Settings -> General -> TV & Display Options -> Setup -> Calibrate HDR for Games in the system settings to open the console's HDR calibration tool.
Source and dateXbox US official guide (2020, English UI)
Confirmed scopeVerifies the menu path to the Xbox Series X|S built-in adjustment feature only

Where to Find HDR Calibration in GTA VI Display Settings on PS5